Hey Guys,
Here is my newest project. A button Box with an Push to talk lever, you can easily pull while driving, without looking at it..
I made everything out of wood. It is easy to work with and I also like it.
First you need the components.
1. An Button Box board. (Sorry I only have links to Spanish Amazon. But Im sure you'll find this anywhere)
It comes with an USB cable and cables for the buttons.
https://www.amazon.es/gp/product/B01CFR ... UTF8&psc=1
2. Some actual buttons, belive it or not
You can choose whatever you like. Just be aware. Some Buttons are snapping in. One push on, then another push off.
Here is what I ordered.
https://www.amazon.es/gp/product/B077G6 ... UTF8&psc=1
And also this little ones for the lever....
https://www.amazon.es/gp/product/B00X5F ... UTF8&psc=1
Button Box with push to talk lever
Re: Button Box with push to talk lever
So now I had a lot of sowing and thrilling to do.
I made pictures of course for you guys
So lets get starting....
Making a frame out of 44x15mm hardwood. (Nice clean I had laying around)
Making a stand. On the right you see the lever. And on the left is the back plate.
Soldering the Buttons to the cables and making the front cover.
I made pictures of course for you guys
So lets get starting....
Making a frame out of 44x15mm hardwood. (Nice clean I had laying around)
Making a stand. On the right you see the lever. And on the left is the back plate.
Soldering the Buttons to the cables and making the front cover.
Re: Button Box with push to talk lever
Here are the buttons for the lever, I had to put in the side wall.
The buttons in the front.
I also put the power LED from the board and soldert it on to cables. So I can put it in the front panel.
The buttons in the front.
I also put the power LED from the board and soldert it on to cables. So I can put it in the front panel.
Re: Button Box with push to talk lever
Final step. Putting everything together.
It was a tight fit
And here is the final product. Im a lil proud of. (On the right of the box you see the leaver I can easily pull while driving.)
If you have any questions. Im happy to answer them.
It was a tight fit
And here is the final product. Im a lil proud of. (On the right of the box you see the leaver I can easily pull while driving.)
If you have any questions. Im happy to answer them.
Re: Button Box with push to talk lever
Very nice Weena!
I have the very same button box in mind (ready to order - soon as I get my new shifter) only though I am going to go with a plastic box something like this.
https://www.amazon.com/Enclosures-Boxes ... ammond+6x6
Very nice work am looking forward to hear how it works.
I have the very same button box in mind (ready to order - soon as I get my new shifter) only though I am going to go with a plastic box something like this.
https://www.amazon.com/Enclosures-Boxes ... ammond+6x6
Very nice work am looking forward to hear how it works.
Re: Button Box with push to talk lever
So far it is working fine.
I have two buttons snapping in. One for the handbrake. I can push and it stays on. And one for the horn
The other buttons I have for looking around, mini map and other stuff.
When you buy a Plastic box. Don´t forget you have to mount it to your desk somehow
I have two buttons snapping in. One for the handbrake. I can push and it stays on. And one for the horn
The other buttons I have for looking around, mini map and other stuff.
When you buy a Plastic box. Don´t forget you have to mount it to your desk somehow
Re: Button Box with push to talk lever
simple solution, very well executed. And most importantly very nice documented. I have to think about something...